Autocue DN-VGA/002 VGA Video Splitter (1x4)
Autocue DN-VGA/002 VGA Video Splitter (1x4)
Details
Autocue VGA Video Splitter (1x4)
The Autocue VGA Video Splitter (1x4) by Kramer outputs a single VGA signal to 4 devices. This device is ideal when you need to send the same computer VGA signal out to multiple prompters.
Along with a high bandwidth of 400MHz and ID bit control this device incorporates Kramer's Kr-isp Advanced Sync Processing which, by restoring the sync signal waveform, overcomes the problem of low sync, thus ensuring compatibility with a greater range of computer devices.
EDID PassThru is another important function used by this device to pass EDID/HDCP signals from a source to the display. An optional rack adapter (RK-3T) is available for installing three of these units, side by side, in a 1U rack space.
- Kr-isp Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr−isp advanced sync processing can be enabled or disabled.
- EDID PassThru - Passes EDID/HDCP signals from source to display.
- Selectable Sync Input Impedance - 75Ω (video), 510Ω (Graphics/TTL)
- Compact Kramer TOOLS - 3 units can be rack mounted side−by−side in a 1U rack space with the optional RK−3T rack adapter
|
Input |
1 UXGA on an 15-pin HD connector |
|
Output |
4 UXGA on 15-pin HD connectors |
|
Output Level |
Max. output level: 2.2Vpp |
|
Bandwidth |
400MHz / 3dB |
|
Differential Gain |
0.03% |
|
Differential Phase |
0.03° |
|
K-Factor |
<0.05% |
|
Signal to Noise Ratio |
72dB @ 5MHz |
|
Controls |
Internal ID BIT switch; internal analog/TTL switches for setting the sync |
|
Coupling |
DC |
|
Options |
RK-3T 19" rack adapter |
|
Power Requirements |
5VDC. 130mA |
|
Dimensions (WxDxH) |
4.8 x 2.8 x 1" (122 x 71 x 25mm) |
|
Weight |
0.7 lbs (0.3kg) |
* Certain Vitec products may be considered Special Order and a 25% restocking fee may be imposed by the Manufacturer.
| Manufacturer | Autocue |
|---|
