The HCO-3901 is a 3x1 3G*/HD/SD/ASI change-over which support 16 channels of embedded audio & metadata. The module can perform a video & audio "Clean & Silent Switch" between sources using the CS option. In the event of a power failure, the PGM signal is protected...
Miranda HCO-3901-OPT-ALC-6 6-channel on-board ALC option - HCO-3901-OPT-ALC-6
The HCO-3901 is a 3x1 3G*/HD/SD/ASI change-over which support 16 channels of embedded audio and metadata. The module can perform a video and audio "Clean and Silent Switch" between sources using the CS option. In the event of a power failure, the PGM signal is protected by relays fitted on the rear module, maintaining the integrity of the selected signal at the output. Relays are fully controllable via GPI. Input selection can be performed automatically or manually.
Key Features
Two primary inputs: IN 1 and IN 2 plus one secondary: IN 3
Four outputs: main program and three previews
Supports 3G, HD (1080i50/59.94, 720p50/59.94) and SD (525, 625) or ASI input
Electronic switching with relay backup (on rear module) maintains selected input with power loss for Primary inputs IN 1 and IN 2
Automatic mode using internal signal analysis with alarm parameters for IN 1 and IN 2
Manual change-over by local frame controller, iControl, iControl Solo, RCP-200 or GPI (3DRP rear) for 3 inputs
Alarm reporting to iControl facility monitoring and control system
Compatible with iControl end-to-end A/V fingerprint analyzer for lip sync error detection and measurement
GPI in and out (IN 1, IN 2, IN 3, auto, bypass)
Optional clean switch function (video and 16 channels of audio) for IN 1 and IN 2
Optional on-board automatic loudness control by Grass Valley
Reference input with passive loop through (3DRP rear only)
Two line timing window with CS option
Thumbnail and audio level meter streaming for IN 1, IN 2 and PGM OUT
Loudness compliant to EBU R128-2014, ATSC A/85:2013 (FCC CALM compliant) and ARIB TR-B32 (ITU-R BS.1770-3)
Specifications
VIDEO INPUTS (3)
Signal:
SD: SMPTE-259M-C (270 Mb/s)
HD: SMPTE-292M (1.485, 1.485/1.001 Gb/s)
3G: SMPTE-425 (2.970, 2.970/1.001 Gb/s)
DVB-ASI: EN 50083-9
Supported formats:
SD: SMPTE-125M: 480i59.94
SD: EBU: 576i50
HD: SMPTE-274M: 1080i59.94, 1080i50
HD: SMPTE-296M: 720p59.94, 720p50
3G: SMPT-425 level A (mapping 1): 1080p59.94, 1080p50
Cable length1:
350m (1,148 ft.) Belden 8281 at 270 Mb/s
130m (426 ft.) Belden 1694A at 1.485 Gb/s
90m (295 ft.) Belden 1694A at 2.970 Gb/s
Return loss:
>10 dB up to 1.5 GHz (IN 1, IN 2)2
>8 dB up to 3 GHz (IN 1, IN 2)2
>15 dB up to 1.5 GHz (IN 3)
>10 dB up to 3 GHz (IN 3)
VIDEO OUTPUT (4)
Signal:
SMPTE-259-C (270 Mb/s)
SMPTE 292M (1.485, 1.485/1.001 Gb/s)
3G: SMPTE-425 (2.970, 2.970/1.001 Gb/s)
Supported formats:
SD: 480i59.94, 576i50
HD: SMPTE 274M: 1080i59.94, 1080i50
HD: SMPTE 296M: 720p59.94, 720p50
3G: SMPT-425 level A (mapping 1): 1080p59.94, 1080p50
Return loss3:
>15 dB up to 270 MHz (PGM out)
>12 dB up to 1.5 GHz (PGM out)
>7 dB up to 3 GHz (PGM out)
>15 dB up to 270 MHz (PVW out)
>15 dB up to 1.5 GHz (PVW out)
>10 dB up to 3 GHz (PVW out)
:Jitter
SD/HD <0.2 UI (alignment jitter)
3G <0.3 UI (alignment jitter)
REFERENCE INPUT (1)
Signal:
SMPTE 170M/SMPTE 318M/ITU 624-4/BUT 470-6 or composite sync
SMPTE 274M / SMPTE 296M tri-level sync
Return loss: >35 dB up to 5.75 MHz
GPI (10)
Connector: HD-15, opto-isolated, common ground
GPI IN (5): Contact closure to ground
GPI OUT (5): Contact closure to ground
External pull up Voltage: 3.3V to 24V max
External GPI power: 5V nominal
VIDEO PROCESSING PERFORMANCE
Signal path: 10 bits
Latency: 0.4 ns without CS option and ALC option
Maximum of 2 lines with CS or ALC option
AUDIO PROCESSING PERFORMANCE
Quantization: 20-24 bits
Sampling: 48 kHz, synchronous
Number of channels: 16, 4 groups
Audio latency:
0.4 ns without CS option and without ALC option
Add 1 ms if CS option is enabled
Add 1 ms if ALC option is enabled
ELECTRICAL
Power: 10W
Note 1: Cable length and return loss specifications will be reduced when using the output protected by the bypass relay, refer to the manual for more details.