Telecast CHG3-BS-3200-95VD-304M-4W Base station w/internal power...

The CopperHead 3200 system is a robust fiber optic link between your camcorder & your truck, control room or "video village" position. The system will simultaneously transport both digital (SDI or HD-SDI) & analog (NTSC or PAL) program video, as well as all two-way...
Manufacturer: Telecast Fiber Systems
$7,106.45
Availability: In stock
SKU
CHG3-BS-3200-95VD-304M-4W
Manufacturer: Telecast Fiber Systems

Telecast CHG3-BS-3200-95VD-304M-4W Base station w/internal power supply, opticalCON or 304M - CHG3-BS-3200-95VD-304M-4W



The CopperHead 3200 system is a robust fiber optic link between your camcorder and your truck, control room or "video village" position. The system will simultaneously transport both digital (SDI or HD-SDI) and analog (NTSC or PAL) program video, as well as all two-way camera control, audio, video, data, tally/call and intercom signals between the camera and the base station.

Key features and benefits

  • All camera signals on lightweight fiber cable
  • Broadcast quality video and audio
  • Return HD Video
  • Two-channel intercom
  • Multikilometer distance capability
  • Battery mount options for Anton/Bauer or V-Mount
  • Wide temperature range
  • Low power consumption
  • Multiple fiber connector options
  • Two fiber cable options
  • Tactical fiber
  • Military specification, battlefield proven
  • Requires local power at camera
  • SMPTE hybrid fiber
  • Internal power supply delivers 95 W power to the camera up to 213 m (780 ft)
  • External PowerPlus delivers 100 W power to the camera up to 2 km (1.2 miles) 150 W opt.
  • Use the TelePort 3G system to multiplex up to eight CopperHead 3200 systems onto a single strand of fiber
  • Durable, high reliability design

CopperHead fiber optic camera transceiver

Specifications

  • Video, Digital (bi-directional)
  • Interface:SMPTE 259M, 292M
  • Data rate:270 Mbps or 1.5 Gbps
  • Input level:800 mV p-p
  • I/O impedance:75 ohm
  • Output impedance:75 ohm
  • Bit-error rate at -22 dBm:10-12
  • Jitter (pathological data):<0.2>
  • Rise/fall times:<270>
  • Video, Analog (bi-directional)
  • Interface:RS-170, NTSC, PAL
  • Frequency response:30 Hz - 4.2 MHz: ±0.25 dB
  • 8 MHz: -3 dB
  • Video signal to noise ratio:
  • ≥70 dB
  • Differential gain:<2>
  • Differential phase:<>
  • Ethernet
  • Data support:10BaseT/100BaseT
  • Connector:Twisted pair RJ45
  • Cable compatible:UTP 100 ohm Cat5
  • I/O impedance:10 kohm / 30 ohm
  • Audio
  • Number of channels:1 to 4
  • Type:Balanced, line level
  • Impedance:>15 kohm
  • Maximum input level:24 dBu
  • Quantization:24 bits, 128x (oversampled)
  • Sample rate:48 kS/s
  • Frequency response:±0.1 dB, 20 Hz to 20 kHz
  • Intercom
  • Number or channels:2
  • Interface types (base):RTS, Clear-Com or 4-Wire
  • Frequency response:200-18 kHz, ±3dB
  • Max distortion:
  • ≤0.5 %
  • Noise:<-60>
  • Max gain (RTS or Clear-Com):
  • ≥24 dB
  • Min gain (RTS or Clear-Com):
  • ≤-45 dB
  • Electro-Optical
  • Operating wavelengths:1310/1550 nm
  • Tx laser output power (std./opt):-6/0 dBm
  • Rx sensitivity, HD-SDI:-22 dBm
  • Fiber compatibility:Single-mode
  • Optical connector options - camera unit:
  • Local power: MX or opticalCON
  • Remote power:Short range power, SMPTE 304M or opticalCON
  • Long range power, SMPTE 304M
  • Optical connector options - base station:
  • Unpowered ( TAC Cable): ST or opticalCON
  • Remote power (hybrid fiber): Standard power: SMPTE 304M, opticalCON, or STs and Molex
  • Distance Limit *
  • TAC Cable (local power at camera):Standard laser: 15 dB optical loss (
  • ≥5 km *)
  • Optional DFB laser: 19 dB optical loss (~30 km *)
  • SMPTE 311M hybrid fiber:Standard internal power supply w/PowerWafer: ~ 300 m (984 ft), 95 W at 12 VDC*
  • Long range: HDX w/PowerPlus, LP: ~2 km (6562 ft): 100 W cont. / 150 W peak *
  • Mechanical/Environmental
  • Dimensions (W x H x D):Camera unit: 2.5 x 2.2 x 6.5 in
  • Base station: 17.5 x 1.75 x 9 in
  • PowerWafer: 5 x 2.2 x 6.12 in
  • PowerPlus LP (100 W): 5 x 2.5 x 6 in
  • PowerPlus HP (150 W): 5 x 3.7 x 6 in
  • HDX: 13 x 8.5 x 3.5 in
  • Weight:Camera unit: 1.5 lb
  • Base station: 5 lb
  • PowerWafer: 1.5 lb
  • PowerPlus: LP: 2.3 lb, HP: 2.5 lb
  • HDX: 10.5 lb
  • Power consumptionCamera unit: 8 W at 10-18 VDC
  • Base station ( TAC Cable): 10 W at 10-18 VDC
  • Temperature range:-25 to 55 C
  • Humidity range:0 to 95 % RH, non-condensing
  • * The maximum cable length varies due to optical loss that can depend on cable quality, dirt/dust/contamination on connectors, and number of fiber interconnects. When using hybrid cable for power, the size of the hybrid cable, as well as the power draw of the camera, lens, and accessories are also factors.

Diagram

CHG3-BS-3200-95VD-304M-4W
Manufacturer: Telecast Fiber Systems
More Information
ManufacturerTelecast Fiber Systems
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Search engine powered by ElasticSuite