Miranda 8500H-OP-3G-ETH-SFP 8500 3 OUT IP Gateway output fiber

Miranda 8500H-OP-3G-ETH-SFP 8500 3 OUT IP Gateway output fiber - 8500H-OP-3G-ETH-SFP

Key Features

Space, power and cost saving with integrated audio processing

• Integrated 16 channel audio de-embedding, shuffling, re-embedding and breakaway saves space, power, weight and costs


• For optimal cost efficiency, audio processing can be performed across all video inputs, using just a small portion of matrix equipped with audio processing modules using Dynamic Hybrid Pathfinding


• Dynamic Hybrid Pathfinding automatically routes signals via the audio processing modules whenever required, under manual or automated control


• Audio concentrators minimize cabling, associated labor, and weight

Eliminating audio to video delay problems

• By eliminating the requirement for external audio de-embedders and embedders, the router prevents audio to video latency problems, which can be an issue in live production environments when feeding signals to an audio console

Simplified cable management with direct fiber connectivity

• Unique, clean design provides unparalleled signal integrity and allows longer coaxial cable runs


• High density coaxial connectors streamline cabling and lower weight


• Direct fiber connectivity using SFP modules for 1310 nm and CDWM wavelengths


• MADI over fiber available through external conversion using PicoLink FIO-991p MADI

Ultra resilient design

• Patented N-on-1 crosspoint redundancy


• Front loading with hot swappable power supplies, input, output, controller and crosspoint modules, and speed controlled fans


• Small failure block: input block is 9, output block is 18


• Redundant power supplies, crosspoints, and control cards

Scalable for the very largest systems

• Five frames sizes provide matrices from 144x144 to 1152x1152 and larger within the NVISION 8500 router family

• Rectangular matrices (twice as many outputs as inputs) are ideally suited to feeding multiviewer systems

Highly flexible control

• Integrates tightly with advanced NVISION 9000 controllers and wide range of control panels for easier signal management, even in the most complex facilities

Rich facility integration

• Exceptional integration across a facility, including with multiviewers, signal processors, master control switchers, tally management systems, and production switchers

Specifications

Electrical

PS8100

• AC input: 90-130/180-250 VAC, 50/60 Hz, auto-ranging, 15A


• AC fuses: No user serviceable fuses


• AC connectors:


• Female: IEC 320-C13 (one for each PS8100 module installed)


• Male: NEMA 5-15p


• AC power: PS8100, 850W, one IEC 320-C13


• AC power usage: Power based on PS8100 modules

NV8144

• Coax: 850W nominal (144x144), power factor corrected


• Fiber optic: 850W nominal (144x144), power factor corrected


• Hybrid: 850W nominal (144x144), power factor corrected

Diagnostic
Type: Serial port
Standard: SMPTE 207M, EIA-422/EIA-232, configurable
Connector: 2, DE-9
Serial Control
Type: Serial port (2 per control card)
Standard: SMPTE 207M, EIA-422
Connector: 4, DE-9
Ethernet
Type: 10/100 Base T
Standard: IEEE 802.3
Protocol: NVISION Ethernet protocol
Connector: 2, RJ45
Output Signal Monitor
Type: Standard definition and high definition digital video
Standard: See related section of this specification for standard for each monitored signal type
Connector: DIN 1.0/2.3
Impedance: 75Ω
Expansion I/O
Type: Proprietary
Standard: See related section of this specification for standard for each signal type sent between routers
Connector: 128, proprietary
Control Expansion
Type: 10Base2 port
Connector: 2, BNC, loop through
Impedance: 50Ω
Power Supply Monitor
Connector: DB-25
Environmental Specifications
Operating temperature: 0 to 40° C (32 to 104° F)
Relative humidity: 0 to 90%, non-condensing
Video Reference Input
Type: Analog video reference
Standard: PAL, NTSC, or tri-level sync
Connector: Loop through, BNC
Impedance: 75Ωor Hi-Z (>20,000Ω), not selectable
Level: 0.5 Vp-p to 2.0 Vp-p
Return loss: >30 dB to 5 MHz
Output timing jitter: <0.2 Ulpp from 10 Hz to 1.0 kHz
Inputs/Outputs (HD/SD)
Type: High definition serial digital video
Standard: SMPTE 259M and 292M
Data rates: Auto re-clocking at 270 Mb/s and 1.483, 1.485 Gb/s or auto bypass with pass-through from 19 Mb/s to 1.5 Gb/s (Note: Inputs do not reclock.)
Connector: DIN 1.0/2.3
Impedance: 75Ω
Cable equalization: 150m (492 ft.) Belden 1694A, 85m (278 ft.) Belden 1855A, or equivalent cable, at 1.5 Gb/s
Router path: Non-inverting
I/O return loss: >15 dB, 5 MHz to 1.5 GHz
Output level: 800 mVpp ±10%
Output rise/fall time: ≤270 ps
Output overshoot: ≤10% of amplitude max
Output alignment jitter: ≤0.2 UIpp from 100 kHz to 150 MHz
Output timing jitter: ≤1.0 UIpp from 10 Hz to 100 kHz
Inputs/Outputs(3G/HD/SD)
Type: High definition serial digital video
Standard: SMPTE 259M, 344M, 292M and 424M
Data rates for auto reclocking: 270 Mb/s and 1.483, 1.485, 2.966, 2.970 Gb/s or auto bypass with pass-through from 19 Mb/s to 3 Gb/s (Note: Inputs do not reclock.)
Connector: DIN 1/2.3
Impedance: 75Ω
Cable equalization (for cables listed or equivalent cable):

• 400m (1,312 ft.) Belden 1694A, 250m (820 ft.) Belden 1855A at 270 Mb/s


• 150m (492 ft.) Belden 1694A, 100m (328 ft.) Belden 1855A at 1.5 Gb/s


• 100m (328 ft.) Belden 1694A, 45m (147 ft.) Belden 1855A at 3 Gb/s

Router path: Non-inverting
Output level: 800 mVp-p ±10 %
I/O return loss: >15 dB, 5 MHz to 1.5 GHz; >10 dB, 1.5 GHz to 3 GHz
Output rise/ fall time: ≥135 ps
Output overshoot: ≥10 % of amplitude max
Output alignment jitter: ≥0.3 UIpp from 100 kHz to 300 MHz
Output timing jitter: ≥2.0 UIpp from 10 Hz to 100 kHz
Specifications subject to change without notice.

Diagram