Canon Rc-Ip100 Ptz Controller

Canon Rc-Ip100 Ptz Controller

Canon’s RC-IP100 controller provides control for up to 100** supported cameras*. Additionally, through the serial port, the RC-IP100 can control one compatible Canon camera via the NU protocol. The controller is equipped with a large 7” diagonal touch screen, zoom lever and joystick in order to pan, tilt, zoom and change camera picture settings with precise precision. The smooth responsiveness of the joystick allows operators to capture on-air movements with confidence. Pair this controller with a supported Canon PTZ camera to create the ideal camera/controller combination into your video production.

Key Features

• Control up to 100 Canon Supported cameras
• Smooth PTZ movement and Precise Control for Professional Productions
• Adjust Pan, Tilt, Zoom and Change Camera Function Settings Remotely
• Equipped with 7” diagonal Touch Screen, Control and Zoom Lever and 4 Customizable Buttons

Supported Canon cameras include:

• CR-N700
• CR-N500
• CR-N300
• CR-X500
• CR-X300
• C500 Mark II (requires firmware v1.0.3.1 or later)
• C300 Mark III (requires firmware v1.0.1.1 or later)
• XF605 (requires firmware v1.0.1.1 or later)

Specifications

General

Power

• 12V DC (AC adapter power supply) CAUTION: Utilize included 12V DC power supply only. All other power supplies may cause permanent damage to controller.

Dimensions

• Width 350mm (13.7 in) x Height 110mm (4.3 in) x Depth 182 mm (7.1 in)

Weight

• Approx. 2.1 kg (4.6 lbs.)

Operating Temperature

• 0 °C ~ 40 °C

Camera Control

Controller Supported Cameras

• CR-N700, CR-N500, CR-N300, CR-X500, CR-X300, C500 Mark II (requires firmware v1.0.3.1 or later), C300 Mark III (requires firmware v1.0.1.1 or later), XF605 (requires firmware v1.0.1.1 or later)

Number of Connectable Cameras

• 1 unit (RS422)
• 100 units (*When RS422 is connected: 99 units)

Preset (Store/Play/Delete)

• 100 per camera

Trace (Store/Play/Delete)

• 10 per camera

Communication System

• IPv4

Touch Panel

• 7-inch (diagonal) touch screen

Terminal

Tally

• D-Sub 9 pin

LAN

• R -45 x 1 (10 BASE-T/100 BASE-TX)

Serial

• RJ-45 x 1 (RS422)

What's In The Box:

• RC-IP100 Remote Camera Controller
• AC Adapter
• AC Cable 
• Printed Documents