Magewell USB Capture HDMI Plus – 32040

Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
Linux (Ubuntu 12.04-16.10, CentOS 7)
OS X 10.9-10.11
macOS 10.12
Chrome OS

Windows
– DirectShow
– Wave API/DirectSound/WASAPI
Linux
– V4L2
– ALSA
OS X/macOS
– QuickTime
– AV Foundation

VLC
VirtualDub
OBS
XSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow, V4L2, QuickTime, AV Foundation based encoding or streaming software

HDMI
– DVI-D 1.0
– HDMI 1.4
3.5mm audio jack
– Microphone interface

USB 3.0
– compatible with USB 2.0
– compatible with USB 3.1 Gen 1

3.5mm audio jack
– headphones interface

HDMI
– HDMI loop-through interface

Support for input video resolutions up to 4096×2160

297MHz HDMI receiver
Adaptive HDMI equalizer support for cables lengths up to 30M
Support for customized EDID
Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
Full colorimetry support
Support for up to 4096×2160 4:4:4/4:2:2 30fps or 4096×2160 4:2:0 60fps input signals
For 4:2:0 input signals, the horizontal and vertical resolution will be reduced to 1/2 for capturing
For 4:4:4/4:2:2 input signal at more than 170MHz, the horizontal resolution will be reduced to 1/2 for capturing
Support for 2 channel ISC60958 audio streams
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.

Extraction of stereo embedded HDMI audio for recording and output via 3.5mm stereo mini-jack Line Out
Capture analog audio via 3.5 mm microphone interface
Integrate the functions of a USB audio card. Playback audio via 3.5 mm headphones interface. Support for recording the playback audio of the computer.

Support for capture resolutions up to 2048×2160
Support for capture frame rates up to 120fps. (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency. Typical capture frame rates on the Intel USB 3.0 controller are as follows.)
– 1920×1080 YUY2 (up to 70fps)
– 1920×1080 RGB24 (up to 60fps)
Support for YUY2 & UYVY4:2:2 8-bit
Support for RGB24 & RGB32 4:4:4 8-bit
The default capture format is YUY2. More capture format can be set using USB Capture Utility.

Video processing pipelines with 160 Mpixels/s processing bandwidth
Video cropping
Video scaling
Video de-interlacing
– Weave
– Blend top & bottom field
– Top field only
– Bottom field only
Video aspect ratio conversion
– Auto or manual selection of input aspect ratio
– Auto or manual selection of capture aspect ratio
– Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
Video color format conversion
– Auto or manual selection of input color format & quantization range
– Auto or manual selection of capture color format, quantization range & saturation range
– Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
– Support for Limited or Full quantization range
– Support for Limited, Full & 'Extended gamut' saturation range
Video frame rate conversion
Vertical flip and mirror

Support for connecting multiple USB devices in one system
Support for setting the device serial number as the device name shown in the system using USB Capture Utility

USB Capture SDK provide functions including signal status extraction, capture configuration, etc.

Multiple devices in one system can be upgraded simultaneously

Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.

98.1mm (L) x 56.8mm (W) x 17mm (H)

5V max current: 900mA
max power consumption：~4.5W

Operating temperature: 0 to 50 deg C
Storage temperature: -20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing